Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Only applicable when the voyage does not have TCin
In order to get a complete voyage result estimation it is possible to edit the daily hire and address commission for vessels/voyages that does not have TC-in present in the system.
The details of a voyage can be edited and maintained in the Voyages module.
TC Voyages have "TC contract" section, while all other voyages will have a "performance cargo" section instead.
With the Intake Calculation function you can change parameters of a voyage to get an overview of quantities available for cargo at the port calls.
The intake calculation function can be opened from one of the following modules:
Click on a voyage in the list or board to open it in the drawer.
Select Voyage Intake Calculation.
At the top, fields for changing the stowage and bunker properties for the entire voyage are displayed.
A table of all the port calls on this voyage is shown in this section. To change the intake reduction properties per port call, click a row to open a window where you can make adjustments.
A mixed chart of the calculation results is generated at the bottom. Each port call has multiple graphs to show the reductions, cargo quantity and quantity available for cargo. The charts gets updated automatically when there are changes to the voyage header, port call, or vessel parameters.
Click on the legends at the top of the chart to toggle the display of a graph. Hover the mouse over the chart to inspect the values of each calculation data point.
PlanningMaster Fleetplan
PlanningScenario Details.
At the top right, click on Functions.
When you have click it and the details will show in a panel (so called "drawer") on the right hand side. Details can be maintained directly in the fields.
PlanningMaster Fleetplan
PlanningScenario Details.
At the top right, click on Functions.
The loadline information table shows data on the voyage that might affect the intake. To change these values, you need to edit the vessel in the Vessels module in master data.
Parameter | Description |
Stowage Factor | Cubic meters of space occupied by one metric tonne of cargo |
DO ROB Voyage Start | Diesel oil at voyage start |
DO LS ROB Voyage Start | Low-sulphur diesel oil at voyage start |
FO ROB Voyage Start | Fuel oil at voyage start |
FO LS ROB Voyage Start | Low-sulphur fuel oil at voyage start |
Parameter | Description |
Zone | Sets the vessel DWT that is used in the calculation. |
Water Salinity | One of Saltwater/Brackish Water/Fresh Water. Affects the water density. |
Water Density | Density of the water at port. Higher value increases intake. |
Draft | Intake draft reduction of the vessel. Lower value increases intake. |
Safety Margin | Safety margin for the draft. Default value is 20%. Lower value increases intake. |
Constant Reduction | Intake constant reduction of the vessel. Lower value increases intake. |
Fresh Water Reduction | Intake fresh water reduction of the vessel. Lower value increases intake. |
Depending on your access permissions the list of voyages might not be visible.
The "Voyages" module can be located from the menu under "Operations".
From the list of voyages using filters
Having the list of voyages open in the Voyages module you can use filters to find the voyage you are looking for. Clicking the voyage in the list will open a drawer with additional information.
only applicable in voyage status Estimate, Scheduled Unallocated and Scheduled Allocated
Click a row to edit bunker price
Edit the price for each bunker type in the modal
Open the Voyages module in the Core section.
Fill in all required fields listed below in the Create Voyage window.
Click Create.
Required fields:
Vessel
Load Port
Discharge Port
By default, new voyages have Voyage Progress set to "Estimate" and Voyage Status set to "T".
Click Create Voyagein the top right corner.
With the Sensitivity Analysis tool you can run calculations on a chosen parameter to evaluate risk.
The sensitivity analysis can be opened from one of the following modules:
Click on a voyage in the list or board to open it in the drawer.
Select Voyage Sensitivity Analysis.
Select a voyage parameter which is then adjusted by the numerical variance for each calculation.
The chart shows the all the calculated values for the voyage. There are 15 data points, with the current voyage displayed in the middle, with negative variance on the left side, and positive variance on the right side.
Hover the mouse over the chart to inspect the values of each calculation data point.
PlanningMaster Fleetplan
PlanningScenario Details.
At the top right, click on Functions.
Press the menu iconto download the chart as an image (SVG or PNG), or a text file (CSV) that can be imported to a spreadsheet software.
Parameter
Calculated value
Freight Rate
TCE
Bunker Price / MT (DO, LS DO, FO, LS FO)
TCE
TCE
Freight Rate