Welcome to the main source of information on the Dataloy product suite.

In the vessel drawer on the top right side there is a small map displaying the vessels last known position. This position is retrieved from AIS-positions for vessels which are subscribing to this feature, for vessels which are not subscribing the latest position is retrieved from the latest position report entered in the system. In addition to this you can now view the route from Dataloy Distance Table from previous port to next port displayed in the same map. The route is the green line in the map.

In the Voyages list under the operations section you can now create a new voyage. In the top right corner the create button is added.

After clicking this button the create voyage modal is rendered on the screen.

Mandatory fields in the modal are "Vessel", "Load Port" and "Discharge Port". Once these are filled in the create button in the modal is activated and the voyage may be created. When a voyage is created from the Voyages List the Voyage Progress is automatically set to "Estimate" and the Voyage Status is set to "T".

After the creation of a voyage the voyage drawer will open and the voyages list will refresh.

To create a new business partner, navigate to the Business Partners module and click the Create Business Partner button.

When creating new business partners there are some details that are mandatory.

Mandatory details:

• Business Partner Type

• Business Partner Name

• Short Name

• Business Partner Code

When you have located a business partner, click it and the details will show in a panel (so called "drawer") on the right hand side. Details can be maintained directly in the fields.

• By clicking the secondary actions icon additional actions may be possible.

  • Edit Business Partner Name

  • Delete

  • Restore (if deleted)

  • Permanently Delete (if deleted)

With a business partner drawer open, locate the section for Bank Accounts under the Financial tab.

Click the "Add" + icon and select a bank account to add the bank account to the business partner.

From the list of business partners you can access any previously deleted entities using the using the "deleted items" toggle switch indicated below.

Vessel "Speed and Consumption data" can be accessed in the top tab menu of the vessel master data screen. Details can be maintained directly in the fields or from the table actions.

To add a Main Engine Speed to a vessel, navigate to the Speed and Consumption section of the Vessel drawer.

In the Main Engine table, click the add button and fill in the fields.

Vessel "internal data" can be accessed in the top tab menu of the vessel master data screen.

For "old" vessels that you have in the system that has minimum of one commenced voyage, the internal data should already be established. For new vessels, or vessels without commenced voyages, then these vessels you need to "Create Internal Data" as per below indicated.

Below three items need to be filled in to create

Once this is done it will be possible to access below screen

To create a new user, navigate to the User Administration module and click the Create New User button.

When creating new users there are some details that are mandatory in order to give the user access to the systems and the different modules.

Mandatory details:

• User Code

Depending on your access permissions the list of Vessels might not be visible.

The "Vessels" module can be located from the menu under Master Data.

• From the list in Vessels module using filters

With a business partner drawer open, locate the section for Contact Persons under the Main Details tab.

Click the "Add Contact Person" + icon and fill in the given fields to add a contact person to the business partner.

Depending on your access permissions the list of users might not be visible.

The "User Administration" module can be located from the menu under System.

• From the list of users using filters

the user to change password. Locate the password input field and fill in the new password.

When all the verifications are met, press enter or click outside of the input field to submit, the password will be changed if no notifications are displaying otherwise.

the user to disable, in the secondary actions click "Disable User". This will set the user to inactive and prevent the user account from logging in. The user can be found again by in the list.

The vessel "AIS Data and Weather Report data" can be accessed in the top tab menu of the vessel master data screen. For the tab to be enabled an AIS position has to be available.

To register a departure in a Port, open the drawer for the given Port Call by clicking it in the list. Then click the icon at the top of the drawer and select "Register Departure". A dialog will open and allow you to enter the departure details.

When delivery is taken by the vessel the "Bunkered Quantity" and "Delivery Date" must be registered in the application. Fill in the required fields and click "Register Delivery" on the action menu.

Ship Role: It is possible for the the a Ship user with the vessel security role to register this information his side and upload the bunker delivery note as an attachment in the system.

When you have located a Port Call, click it and the details will show in a panel (so called "drawer") on the right hand side. Details can currently not be maintained directly in the fields.

At the top of the drawer you can locate an action menu with several action options:

• Register Arrival

• Register Departure

A bunker order can efficiently be added directly from "Booking And Operations" module (in your java client VMS) when having a port call in focus. Either based on the bunker estimates registered, or straight as a bunker order requirement.

Select the port call where you are bunkering and click the "Create new Bunker Order" button from the menu.

A dialog will show a bunker order with the details filled out from the estimates, if there are no estimates please fill in all the details of the bunker order such as Bunker Type, Min/Max quantity, assumed bunker price and supplier.

The functionality with establishing a master role involves giving them access to only their relevant port calls. In order to establish this filter for the user we need to link their credentials to their particular vessel.

Pre requisite for below is that vessel has been created, has been created with security role "Vessel" (only this security role) and .

Step 1: Access vessel master data screen and insert vessel user in the "Master User" field as indicated below. This action will link the vessel to the user so that Crew only see their relevant port calls in the VMS

• From the list of users using filters

  • Having the list of users open in the User Administration application you can use filters to find inactive users by toggling the active switch.

Depending on your access permissions the list of business partners might not be visible.

The "Business Partners" module can be located from the menu under Master Data.

• From the list of business partners using filters

To register a In Port Report, open the drawer for the given Port Call by clicking it in the list. Then click the icon at the top of the drawer and select "Register In Port Report". A dialog will open and allow you to enter the details.

If already situated in the "Bunker Management" application you can create a new bunker order directly there. Click the "+ Create Bunker Order" button in the upper right corner and fill out the vessel and port call together with the other necessary details.

If there are estimates registered in the "Booking and Operations" module these will be defaulted in the details (such as bunker type, quantities and bunker prices)

To register a Noon Report, open the drawer for the given Port Call by clicking it in the list. Then click the icon at the top of the drawer and select "Register Noon Report". A dialog will open and allow you to enter the details.

1. Open the Port Services Orders module under Operations in the menu.

2. Click Create Port Services Order.

3. Fill in the required fields for your order.

To create a new vessel, navigate to the Vessels module under Master Data from the menu and click the Create Vessel button.

When creating a new vessel there are some details that are mandatory.

Mandatory details:

• Vessel Name

• Delete a Business Partner

  • and click in the list the business partner to delete. On the menu open the three dots and find the button "Delete". This will soft delete the business partner. It can be found again by

You are able to keep in control of all your organisations inserted cargoes using the cargo module in VMS.

To create a new Contract of Affreightment Line, navigate to the drawer and click the create button.

A new window will open which you need to fill in as applicable.

Mandatory details:

• Termination Date

The webVMS contains all cargoes created in your system. To access this list you should navigate in the menu to the "Cargoes" link. This will open up your list of cargos.

There are several sorting and filtering options available for you to narrow down what you include in the list view. The sorting functionality is located in the top right corner of the list table. See below screenshot

To register an arrival in a Port, open the drawer for the given Port Call by clicking it in the list. Then click the icon at the top of the drawer and select "Register Arrival". A dialog will open and allow you to enter the arrival details.

Depending on your access permissions the table of Template Cargoes might not be visible.

The list of Template Cargoes can be located from the .

• From the table in Contract of Affreightment Line drawer

Depending on your access permissions the list of Contracts of Affreightment might not be visible.

The "Contracts of Affreightment" module can be located from the menu under Chartering.

• From the list in Contracts of Affreightment module using filters

When you have located a Contract of Affreightment, click it and the details will show in a drawer on the right hand side. Details can be maintained directly in the fields.

• By clicking the secondary actions icon (icon = 3 dots) additional actions may be possible.

  • Edit Contract Number

When you have located a Template Cargo, click it and the details will show in a drawer on the right hand side. Details can be maintained directly in the fields.

• By clicking the secondary actions icon additional actions may be possible.

  • Delete

Depending on your access permissions the table of Contract of Affreightment Lines might not be visible.

The list of Contract of Affreightment Lines can be located from the Contract of Affreightment drawer.

• From the table in Contract of Affreightment drawer

  • Having the drawer for Contracts of Affreightment open you can locate the table listing the Contract of Affreightment Lines. Clicking a line in the table will open a drawer with additional information.

When you have located a Contract of Affreightment Line, click it and the details will show in a drawer on the right hand side. Details can be maintained directly in the fields.

• By clicking the secondary actions icon (3 dots icon) additional actions may be possible.

  • Delete

To change a scenario, navigate to the scenario list and open the scenario drawer by clicking on the respective scenario name.‌

You have the following actions in the drawer:‌

• view in open positions board

• edit (change name, vessels, and voyages)

• delete

• copy

• edit scenario name

• view audit log

• access and upload attachments

The details of a bunker order can be edited and maintained in the Bunker Management application.

When you have located the bunker order click it and the details will show in a panel (so called "drawer") on the right hand side. Details can be maintained directly in the fields.

Adding a product (bunker order line)

If you want to add a product for a given order click the "+" button above the list of products. Then a dialog will show and allow you to enter the details.

Maintaining bunker order lines details

If you want to edit the details of the bunker order line (bunker type, quantity or unit price) click the bunker order line and a dialog will show allowing you to change.

Bunker Type: If estimating bunker intake, the bunker type set will default to the grade this vessel is set up with in your vessel administration screen. If you need to change this you can do that in the below screen or when you actually place/create the order.

Bunker orders can be located in three ways:

• From "Booking and Operations" module

  • Find the voyage and port in "Booking and Operations" module and click the "Bunker Orders" button there. The list of all bunker orders for that port call will show.

• From the list of bunker orders using filters

  • Having the list of bunker orders open in the Bunker Management application you can use filters to find the bunker order you are looking for.

• From the Bunker Requirement list

  • Filter the bunker requirement list as per above to locate the bunker order. This list will show all bunker order lines across all bunker orders.

The Bunker Management module allows you to register and follow a bunker order's workflow from requirement to a paid invoice. The module also enables bunker management systems and agents to make full two-way integrations. Currently two Bunker Procurement Systems (BPS) have made integrations, and have been successfully tested: Clearlynx and World Fuel Service's BunkerLine.

Bunker estimates can still be maintained in "Booking and Operations", allowing you to create detailed voyage estimates. These estimates will later be used as default values when creating the bunker requirement or order.

Advantages:

• Enter two products (bunker requirements/order lines) on the same port, without the need to add two bunker port calls.

• Run reports and statistics based on all the bunker orders, per port, per supplier, status, etc.

• Get a list of future bunker requirements across the fleet.

• Quickly search and filter on all of the bunker orders by vessel, supplier, port, etc.

• Support for integration with bunker procurement systems, such as ClearLynx and World Fuel Services.

When a bunkering is canceled, the bunker order needs to be either canceled or deleted.

1. Click a bunker order in the Bunker Orders module list.

2. When the drawer opens, open the action menuin the top right.

3. Click the Cancel button to cancel the bunker order.

Once you have located a cargo in your cargo list you can click this cargo and open up the cargo booking.. You can maintain/edit the particulars of this cargo from this screen.

Laycan dates are indicating an error if only one of the dates are entered. It will still save the date, but if you re-open a cargo drawer with one date missing it will display as red indicating an error. The validation is separate for Laydays and Laydays (target). It is also not possible to set a commencing date later than the cancelling date. If the Laycan or Laycan (target) is only one specific date, simply choose the same date for both fields.

Depending on your access permissions the list of Vessel Reports might not be visible.

The "Vessel Reports" module can be located from the menu under Operations.

• From the list in Vessel Reports module using filters

  • Having the list of vessel reports open you can use filters to find the report you are looking for. Clicking the report in the list will open a drawer with additional information.

• From the list in Vessel Reports module using quick filters

  • Having the list of vessel reports open you can use quick filters to find the reports you are looking for.

To create a new vessel report, navigate to one of the following pages for maintaining a port call:

• Register Arrival

• Register Departure

To view Vessel Reports, open the drawer for the given Port Call by clicking it in the list. Then click the tab "Vessel Reports" at the top of the drawer and a list with registered reports will be displayed.

To view a given report, click the wanted report in the list and a new drawer will open with further details.

Note: if you want to keep track of incoming reports from multiple vessels or a fleet then check out this page

To view bunker orders on a Port Call, open the drawer for the given Port Call by clicking it in the list. When inside the drawer click the "Bunker Orders" tab, which will display registered bunker orders in a table.

By clicking a row in the bunker order table, a new drawer view will open with additional bunker order information like in Maintain Bunker Orders.

To create a new Template Cargo, navigate to the Contract of Affreightment Line drawer and click the create button.

When creating new template cargo there are some details that are mandatory.

Mandatory details:

• Commodity

• Load Port

• Discharge Port

From the cargo list you can create a new cargo booking by clicking the blue button in the top left corner of the list screen.

The cargo screen will now open. There are four mandatory fields you must input before you can click the create button in this screen.

To create commitments from scratch use the VMS java client and navigate to the module Booking and Operations. Navigate to Voyage -> New -> Unallocated Voyage.

Select the vessel, trade pattern, and the ports to be included in the voyage to create the voyage.‌

The voyage is now displayed as a commitment in FAS and can also be found in the Booking and Operations Module under Unallocated.

Deleting a bunker order entirely removes the order and all its history. This option is suitable when a bunker order is cancelled, or the entire port call or voyage is cancelled.

Click the delete button from the action menu. If the bunker order is not cancelled prior to this...then the delete button will not be active in the menu.

You can now create a voyage from the Open Positions section under FAS/Master. To create a voyage click the "Create Voyage" button in the top right corner of the page.

When you click the "Create Voyage" button the "Create Voyage" modal will render on the screen.

In the "Create Voyage" modal the mandatory fields, "Vessel", "Load Port" and "Discharge Port" must be filled in to activate the "Create" button in the bottom right corner of the modal. Trade, LayCan information and Reference No for the voyage are optional fields.

When a voyage is created from the Open Positions board it will be given the "Progress" "Scheduled (Unallocated)", and "Voyage Status" "T".

After the creation of the new voyage the voyage drawer will open and the Open Position board will refresh.

When a bunker order requirement is stemmed you should update the system with the agreed supplier, prices and quantities and status.

Register the information and click the "action button" with three dots on it, and a menu of actions shows. Click the "Stem" button and the status is transitioned to "Stemmed" if all the requirements are fulfilled.

To create commitments from scratch use the VMS java client and navigate to the module Voyage Estimate. After entering all data, navigate to Voyage -> Freeze and to freeze the voyage.

Next navigate to Voyage -> Schedule -> Unallocated Voyage. The voyage is now shown as a commitment in FAS and can also be found in the Booking and Operations Module under Unallocated.

In any module with a list you can apply filters and sorting to find find the information you want faster.

Sorting

Click on the Sort bybutton to show the menu of fields by which you can sort. Clicking a field will change the sorting, and a downwards or upwards arrow is displayed next to the field name, indicating ascending or descending sorting order. You can sort a list by multiple fields by adding them in the order you want to sort them.

To access the overview of port calls in the Voyage Manager you can navigate to the link called "Port Calls" located in the menu under "Operations" category.

Note: Depending on your access permissions the list of port calls might be pre-filtered basis your system user security rights.

1. As Operator of a vessel you can quickly filter the list to only show "your" port calls with the quick filter called "My Port Calls"

To create commitments from a contract of affreightment use the VMS java client and navigate to the module COA Planner.‌

Select the model voyage you would like to create commitments from and use the Auto Schedule button to create a set of voyages from this model voyage.‌

Next use the Create Unallocated Voyages button to make these voyages show up in the master schedule of FAS.‌

The voyages are now shown as a commitment in FAS and can also be found in the Booking and Operations Module under Unallocated.

In Fleet Allocation and Scheduling (FAS) you can work on voyages in the planning phase and allocate them to vessels. Available voyages and vessels are:

Voyages with status

• Scheduled (Unallocated)

There are three possibilities to create a scenario:

• create from scratch

• create from master fleetplan

The following actions can be performed with a voyage:

You can enable or disable the subscription to AIS-positions for a vessel. There is an icon on the top right corner of a vessel drawer. If the icon is light grey it indicates that the vessel has no IMO-number registered. If the icon is darker grey it indicates that it is not subscribing to AIS-positions. If the icon is blue it indicates that the vessel is subscribing to AIS-positions.

The open positions board gives an overview of the allocation of voyages that need to be scheduled. It shows commitments in the leftmost column and all allocated voyages in the other columns. There are several settings to refine the view located in the top right.

1. Displayed time period

2. Move view to the left or right

3. Switch to Open Positions Board

Voyage Card

On the voyage card a lot of information is shown. The lefthand side of the graphic depicts the open position, the end of the previous voyage. The righthand side of the graphic depicts information on the voyage itself.

Additional information on the voyage and its cargos is displayed in the voyage drawer. This can accessed by clicking on the voyage card.

To add a Bunker Type to a vessel, navigate to the section of the Vessel drawer.

In the Bunker Types table, click the add button and fill in the field.

The open positions board gives an overview of the allocation of voyages that need to be scheduled. It shows commitments in the leftmost column and all allocated voyages in the other columns. There are several settings to refine the view located in the top right.

1. Vertical grouping options: None, Week, Month

2. Column grouping of allocated voyages: Vessels, Areas

3. Show one column further to the left or right

4. Filtering

5. Switch to Gantt Board (Schedule view)

Voyage Card

On the voyage card a lot of information is shown. The lefthand side of the graphic depicts the open position, the end of the previous voyage. The righthand side of the graphic depicts information on the voyage itself.

Voyages and open positions that are ballast and thus don't have an associated cargo are displayed in blue.‌

Additional information on the voyage and its cargos is displayed in the voyage drawer. This can accessed by clicking on the voyage card.

Filtering

You can filter which voyages you would like to see by using the button in the top right corner

You can separately filter commitments and allocated voyages (open positions) by many different criteria. If you select several options in one criterion, an OR filter is applied. If you filter by different categories at the same time, these are combined using the operator AND.

When you have located a user, click it and the details will show in a panel (so called "drawer") on the right hand side. Details can be maintained directly in the fields.

• By clicking the secondary actions icon additional actions may be possible.

  • Edit User Name

  • Disable User

To create a new contract, navigate to the Contract of Affreightment module under Chartering from the menu and click the Create Contract of Affreightment button.

When creating new contract there are some details that are mandatory.

Mandatory details:

• Charterer

• CoA Number

• Commencement Date

• Expiry Date

• Commodity

• Currency

• Business Unit

• Company

• Charterer Responsible

• Freight Rate

• Load Port

• Discharge Port